• Arduino Ethernet Board Rev3 WITHOUT PoE

Description:
Run your Arduino directly on the Internet! The Arduino Ethernet is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button. This board is the latest version, called Revision 3.

NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.

An optional Power over Ethernet module can be added to the board as well. We sell that PoE part as part no. 10081.

The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield.

An onboard microSD card reader, which can be used to store files for serving over the network, is accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4.

A six pin header can be connected to an FTDI cable or USB Serial board to provide USB power and communication to the board.

This board comes without PoE module and without a serial module. We sell these two parts separately.

Specifications:

  • Microcontroller    ATmega328
  • Operating Voltage    5V
  • Input Voltage Plug (recommended)    7-12V
  • Input Voltage Plug (limits)    6-20V
  • Input Voltage PoE (limits)    36-57V
  • Digital I/O Pins    14 (of which 4 provide PWM output)
  • Arduino Pins reserved:
  •      10 to 13 used for SPI
  •      4 used for SD card
  •      2 W5100 interrupt (when bridged)
  • Analog Input Pins    6
  • DC Current per I/O Pin    40 mA
  • DC Current for 3.3V Pin    50 mA
  • Flash Memory    32 KB (ATmega328) of which 0.5 KB used by bootloader
  • SRAM    2 KB (ATmega328)
  • EEPROM    1 KB (ATmega328)
  • Clock Speed    16 MHz
  • W5100 TCP/IP Embedded Ethernet Controller
  • Power Over Ethernet ready Magnetic Jack
  • Micro SD card, with active voltage translators

 

 

Write a review

Please login or register to review

Arduino Ethernet Board Rev3 WITHOUT PoE

  • Brand: Arduino
  • Product Code: 10024
  • Availability: Out Of Stock
  • 43.11€

  • Ex Tax: 35.63€

Related Products

Ethernet cable UTP RJ45 0.5m red / yellow / black

Ethernet cable UTP RJ45 0.5m red / yellow / black

Description: Looking for a nice small ethernet cable to match your Raspberry, Arduino or Phid..

1.95€ Ex Tax: 1.61€

Ethernet cable UTP RJ45 2m black

Ethernet cable UTP RJ45 2m black

Description: Looking for a good quality ethernet cable to match your Raspberry, Arduino or Ph..

1.95€ Ex Tax: 1.61€

Ethernet cable UTP RJ45 5m black

Ethernet cable UTP RJ45 5m black

Description: Does your Raspberry, Arduino or Phidgets project need some extra network cable l..

5.94€ Ex Tax: 4.91€

Ethernet cable FTP RJ45 10m light grey

Ethernet cable FTP RJ45 10m light grey

Description: When your Phidgets, Arduino or Raspberry projects needs to go the real distance ..

12.46€ Ex Tax: 10.30€

Tags: Arduino, Ethernet, Board