ScanaPLUS - 9 Channels, 100MHz Logic Analyzer

 

ScanaPLUS is a robust, versatile and multi-application 9 Channels logic analyzer. It relies on the free ScanaStudio software to capture and analyze logic signals.

This logic analyzer will capture signals at a steady rate of 100 MSPS (Million Samples Per Seconds), whether you’re using 1 or all 9 channels. No compromises.

Thanks to its configurable and fully protected input stage, ScanaPLUS can be directly connected to RS232, to CAN or RS485 differential lines, or to tiny 1.2V logic signals!

Plus, a logic analyzer with 9 channels, will allow you to work with 8-bit buses, having a 9th channel left for a synchronization signal.

Worry no more about maximum capture time or transfer speed from device to computer. ScanaPLUS relies on a proprietary FPGA based compression and streaming algorithm, that will capture signals for as long as your computer can take!

Device main features:

  • 100 MHz
  • 100 G Samples
  • 9 Channels
  • Rich decoders library
  • 1.2V to 5V logic levels
  • Differential channels
  • RS232 & LIN receivers
  • ±50V input protection
  • Multi-step trigger

ScanaPLUS front

 

 

 

 

 

 

 

 

Specifications  

Basic information

  • 100 MSPS (Million samples per second).
  • Accuracy: ± 10 ns
  • Maximum capture time: 1000 seconds *
  • Number of channels: 9.
  • Dimensions: 73 x 46 x 17 mm (2.87 x 1.81 x 0.67 inches)
  • Weight: 59 gm (2.08 oz)

*(Maximum capture time of 1000 seconds is only limited by software capabilities, it may be increased via future software updates)

Input features and characteristics

  • Number of adjustable logic threshold groups: 2
  • Adjustable logic levels for each group: 1.2V, 1.5V, 1.8V, 2.8V, 3.3V to 5V
  • Number of integrated receivers for RS232 bus: 5
  • Number of integrated receivers for LIN bus: 5
  • Number of integrated differential lines receivers: 2 (can used for CAN, RS485, etc.)
  • Activity LED integrated to ScanaPLUS device quickly indicates logic change on any line
  • Input operating range ± 35V
  • Absolute maximum input range ± 50V
  • Input impedance 100KΩ || 5pF

Sophisticated Trigger options

  • Configurable trigger event types: Rising edge, Falling edge, Logic level, Pulse width
  • Multi-channel trigger support: Yes
  • Number of cascaded events to trigger: Unlimited number of events

Software characteristics summary

  • Compatible with ScanaStudio V2.0 and above. (Multi-workspace, features rich environment used for device configuration, signal visualization and protocol decoding)
  • Supported protocols (regularly updated) UART, SPI, I2C, 1-wire, CAN, LIN 1.x & LIN2.x
  • Custom protocol decoder writing feature.
  • Export printer friendly images Yes. Perfectly adapted to report writing
  • Compatible Operating systems:
    • Windows: Windows XP, Vista, and 7 (32 or 64 bit)
    • Linux: Recent Ubuntu (32 or 64 bit)
  • Minimum system requirements USB 2.0 Port, 512MBytes of RAM

 

Typical applications:

  • Analysis and debugging of digital electronics circuits
  • Serial protocol decoding and analysis (UART, I2C, SPI, CAN, 1-WIRE, LIN, Manchester,…)
  • Capturing signals over RS485 and CAN bus differential lines directly
  • Capturing signals over LIN and RS232 data lines
  • Capturing of high frequency / low voltage digital signals (down to 1.2V)
  • Working risk-free where 12V and 24V lines are present.
  • Decoding and debugging of custom / proprietary protocols
  • Capturing of long data sequences (tested up to 10 minutes)
  • Precise frequency and timing measurements
  • Analysis of 8 bit data busses

 

ScanaPLUS specifications

 

 

 

 

 

 

 

 

 

 

ScanaPLUS ScanaStudio

 

 

   
Care for details  

We’ve selected the finest hook probes for you.

At Ikalogic, we are electronics engineers after all  and we know how much it is important to have good quality probes when attempting to debug a digital electronic circuit. That’s why we provide with each ScanaPLUS device 10 Ultra fine, USA made, E-Z hook probes. They are all color coded to match the cables and the software interface. This way, you can know which channel is connected to what in a glance.

 

Integrated CAN, LIN, RS232 and RS485 receivers!

With ScanaPLUS logic analyzer, you don’t neet to worry about converting differential signals to TTL signals. It has got 2 differential bus receivers ready to sniff any CAN or RS485 communication. Additionally, it can be connected to 5 RS232 or LIN lines. Thanks to the broad input range, more protocol and signaling levels can be added via software updates.
 
 

 

ScanaPLUS adapts to your logic signals levels.

ScanaPLUS will allow you to capture logic transition whose logic levels are as low as 1.2v and all the way up to 5V logic levels. While configuring the exact threshold voltage is not critical for most application, it will give you much better accuracy when measuring  high frequency signals (above 1MHz).

Do you need to capture 1.8 v signals on some pins, while capturing 5V signals on others? No problem, with ScanaPLUS you can define 2 different logic thresholds for two groups of inputs!

Activity indicator LED

Thats a detail that can save a big deal of time. If you ever see flat lines on the screen instead of the signals you’re expecting, you may wonder if the problem is with your source code, or the trigger configuration. Sometimes you are just wondering: “is there any activity on the lines at all?” ScanaPLUS’ software independent activity LED will answer your questions by blinking whenever any activity is detected on the logic analyzer lines.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ScanaPLUS Compared to other devices
 

Wondering what ScanaPLUS adds to what already exists on the market?

 

  • With ScanaPLUS, you can directly connect to many types of industrial & automobile buses (RS485, CAN, LIN, RS232). No other logic analyzer we are aware of has this much flexibility when it comes to its inputs configuration.
  • Most (if not all) logic analyzer devices that stream data over the USB suffers from USB bandwidth limitations which is somewhere around 20MB/s. ScanaPLUS don’t. We have worked for more than a year to develop a compression algorithm that will compress and stream the sampled signals over USB. ScanaPLUS only takes about 2 or 3 Mbytes of USB bandwidth in normal usage.
  • Many competitors logic analyzer devices will allow you to set the logic threshold on all channels. ScanaPLUS allow you to configure two different logic thresholds on two different channels. If you want optimal precision over different signal voltages, ScanaPLUS is your choice.
  • ScanaPLUS relies on ScanaStudio V2.0 (and above). That’s by far one of the most fluid, intuitive and lag free logic analyzer software you will find around. Using your logic analyzer with such a smooth software is a real productivity booster.
  • The activity led on the housing that will blink when there is logic change on any channel is real time saver.

ScanaPLUS probes
 

 

References  
 

 

Write a review

Please login or register to review

ScanaPLUS 9 Channels 100MHz Logic Analyzer (V2 - NEW!!)

  • Brand: IKALogic
  • Product Code: 23014
  • Availability: In Stock
  • 254.09€

  • Ex Tax: 209.99€

Related Products

Scanalogic 2 Logic Analyzer

Scanalogic 2 Logic Analyzer

Description: We're very pleased to present to you the Ikalogic Scanalogic 2 logic analyzer. W..

59.95€ Ex Tax: 49.55€