• Micro Load Cell (0-20kg) - CZL635

Description:
A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.

Load cells are designed to measure force in one direction. They will often measure force in other directions, but the sensor sensitivity will be different, since parts of the load cell operating under compression are now in tension, and vice versa.

This Single Point Load Cell is used in small jewelry scales and kitchen scales. It’s mounted by bolting down the end of the load cell where the wires are attached, and applying force on the other end in the direction of the arrow. Where the force is applied is not critical, as this load cell measures a shearing effect on the beam, not the bending of the beam. If you mount a small platform on the load cell, as would be done in a small scale, this load cell provides accurate readings regardless of the position of the load on the platform.

Specifications:

  • Sensor Type: Shear Load Cell
  • Weight Capacity Max: 20 kg
  • Maximum Overload: 24 kg
  • Creep: 20 g/hr
  • Zero Balance: ± 300 g
  • Cell Repeatability Error Max: ± 10 g
  • Cell Non-Linearity Max: 10 g
  • Cell Hysteresis Max: 10 mg
  • Temperature Effect on Span: 1 g/°C
  • Temperature Effect on Zero: 2 g/°C
  • Cable Length: 55 mm
  • Cable Gauge: 30 AWG
  • Material: Aluminium Alloy
  • Screw Thread Size: M5x0.8

Resources:
More information to be found in the User Guide

The following table shows how to connect the Load Cell Wires to the bridge connectors.

Wire Color Red Green White Black
Bridge Connector 5V + - GND

Warning: Make sure to calibrate your load cell before using it. You can find information on how to calibrate the cell in the Load Cell Primer. You should also look at the 1046 - PhidgetBridge User Guide.

 

Write a review

Please login or register to review

Micro Load Cell (0-20kg) - CZL635

  • Brand: Phidgets
  • Product Code: 3134
  • Availability: In Stock
  • 7.95€

  • Ex Tax: 6.57€

Related Products

PhidgetBridge 4-Input ( 1046_0B )  with enclosure and USB cable

PhidgetBridge 4-Input ( 1046_0B ) with enclosure and USB cable

Description: The PhidgetBridge (1046) lets you connect up to 4 un-amplified Wheatstone bridges,..

94.38€ Ex Tax: 78.00€

INSTRUMENTATION AMPLIFIER With Precision Voltage Reference - INA125

INSTRUMENTATION AMPLIFIER With Precision Voltage Reference - INA125

Description: This is the Texas Instrument amplifier, which is commonly used to connect and help..

9.08€ Ex Tax: 7.50€

Wheatstone Bridge Phidget - VINT

Wheatstone Bridge Phidget - VINT

Description Bridge-based sensors are are a common type of resistive sensor that produce a very smal..

33.88€ Ex Tax: 28.00€