• Hitec HS-1425CR Continuous Rotation Servo

Description:
The HSR-1425CR is a special motor manufactured to operate as a continuous rotation servo. Dual ball bearings on the output shaft ensure long lasting performance. Essentially, it is a gear motor that can be controlled by an RC servo controller. It is not normally used as an actuator, as there is no way of commanding it to move to a particular position, as a standard RC servo does.

Normal servos can be adapted to continuous rotation use, but the problem is that the range of positions that result in the motor being stopped is very narrow. Continuous rotation servos, depending on the position commanded, can go forward or reverse at different speeds. With an adapted continuous rotation servo, the position range for the different speeds is very narrow, making it difficult to produce a specific speed.

The 3202 is superior because it has a very wide "deadband" so you can be sure the motor is stopped when you command it, and the position range for forward or reverse motion is very wide, giving lots of speed resolution.

RC servos are hobbyist remote control servos typically used in radio-controlled models, where they provide actuation for various mechanical systems such as the steering of a car, the flaps on a plane, or the rudder of a boat. These servos are not industrial grade and are not recommended for continuous heavy use.



Specifications:

  • Motor Type: Continuous Rotation Servo
  • Range of Rotation: not Limited
  • Maximum Speed at Rated Voltage: 44 RPM
  • Rated Torque: 2.8 kg·cm
  • Gear Train Material: Plastic
  • Bearing Type: Dual Ball Bearing MR106
  • Motor LxWxD: 36.6 mm x 40.6 mm x 19.8 mm
  • Weight: 34 g
  • Rated Voltage: 5 V DC
  • Rated Current (on 1061 controller): 100 mA
  • Rated Current (on 1066 controller): 100 mA
  • Stall Current (on 1061 controller): 500 mA
  • Stall Current (on 1066 controller): 430 mA
  • Version: 3202_0

Resources:
More information to be found in the User Guide

Write a review

Please login or register to review

Hitec HS-1425CR Continuous Rotation Servo

  • Brand: Phidgets
  • Product Code: 3202
  • Availability: In Stock
  • 24.75€

  • Ex Tax: 20.45€

Related Products

PhidgetAdvancedServo 1-Motor

PhidgetAdvancedServo 1-Motor

Description: The PhidgetAdvancedServo 1-Motor allows you to control the position, velocity, and..

41.14€ Ex Tax: 34.00€

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface

Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface

Description: Using only two pins, control 16 free-running PWM outputs! You can even chain up 62..

31.50€ Ex Tax: 26.03€