• 86STH65 NEMA-34 Bipolar Gearless Stepper

Description:

This NEMA-34 motor generates 34 kg-cm of holding torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler. See the "Compatible Products" tab for a complete list of attachments.

When connected to a 1067 Steppercontroller  the 3335 has a maximum speed of 200 RPM. This motor must be controlled by a constant current or chopper drive controller.


Specifications:

Product Specifications

Motor Properties Motor Type Bipolar Stepper Manufacturer Part Number 86STH65-2808B Step Angle 1.8° Step Accuracy ± 5 % Holding Torque 34 kg·cm Rated Torque 30 kg·cm Maximum Speed (w/1067 Motor Controller) 200 RPM Acceleration at Max Speed
(w/1067 Motor Controller)
1E+06 1/16 steps/sec²


Electrical Properties

Recommended Voltage 30 V DC Coil Resistance 1.4 Ω Rated Current (Series Wiring) 2 A Rated Current (Parallel Wiring) 4 A Phase Inductance 3.9 mH


Physical Properties

Shaft Diameter 12 mm Rear Shaft Diameter 3.9 mm Mounting Plate Size NEMA - 34 Weight 1.8 kg Number of Leads 8 Wire Length 400 mm



Motor Controllers

Series Series

This motor must be controlled by a stepper motor controller. These diagrams show to wiring configurations: series and parallel. Series wiring will result in higher torque when the motor is stopped or at low speeds. Parallel wiring will provide better torque at higher speeds, but less torque overall. Since the current in parallel mode is split between two paths, the current rating is doubled. When connecting motor wires to one another, you must solder or screw clamp them together rather than just twisting them together.


Note: Make sure to unplug the power cord from the motor controller before switching wires around.


Write a review

Please login or register to review

86STH65 NEMA-34 Bipolar Gearless Stepper

  • Brand: Phidgets
  • Product Code: 3335
  • Availability: In Stock
  • 90.75€

  • Ex Tax: 75.00€

Related Products

PhidgetStepper Bipolar HC

PhidgetStepper Bipolar HC

Description: The PhidgetStepper Bipolar HC (1067) allows you to control the position, velocity,..

95.59€ Ex Tax: 79.00€

Optical Rotary Encoder ISC3004

Optical Rotary Encoder ISC3004

Description: This is a small, economical, ball bearing construction, rotary encoder without ind..

60.20€ Ex Tax: 49.75€

Hollow Shaft Optical Encoder IHC3808

Hollow Shaft Optical Encoder IHC3808

Description: This sturdy optical quadrature encoder can be attached to the 8mm rear shaft of a ..

57.48€ Ex Tax: 47.50€

Optical Rotary Encoder HKT22

Optical Rotary Encoder HKT22

Description: This compact, economical optical quadrature encoder can be attached to the 4mm rea..

29.95€ Ex Tax: 24.75€