Description:
Light up your world with this 32-output dimmable LED controller. Precise control of your LEDs has never been easier, and it only takes one VINT port on your hub. The LED1000 connects to a port on a VINT Hub. See the Related Products listing for a list of hubs. For a stand-alone LED controller, please check for the PhidgetLed-64 Advanced (1032_0B) board.
Individual LED Control
You can control the power supplied to your LEDs in three ways: First, choose a forward voltage for the entire controller to operate at. Of the four settings, choose the value closest to the rated forward voltage of your LEDs. Next, set a current limit to determine the maximum brightness of each channel. Lastly, you can set the duty cycle (brightness) of each channel from 0% (off) to 100% (maximum brightness) on the fly.
Externally Powered
This module requires an external power supply to power the LEDs. The VINT port is completely isolated from the power supply in order to increase system stability by eliminating ground loops.Please use one of our 12V power supplies!
LED Cables
The LED's can be easily attached using our LED cables (see the related products listing).
Product Specifications
Board Properties | |
---|---|
Controlled By | VINT |
Number of LED Outputs | 32 |
Electrical Properties | |
Current Consumption Min | 5 mA |
Supply Voltage Min | 8 V DC |
Supply Voltage Max | 30 V DC |
Current Consumption Max | 2 A |
LED Current Limit Max | (per channel) 40 mA |
Forward Voltage Max | 5.6 V DC |
Forward Voltage Min | 3.2 V DC |
LED Driver Update Rate | 90 Hz |
Selectable Output Voltage Levels | 3.2, 4.0, 4.8, 5.6 VDC |
Physical Properties | |
Operating Temperature Min | -40 °C |
Operating Temperature Max | 85 °C |
Power Jack | 5.5x2.1mm, Center Positive |
Documents
32x Isolated LED Phidget
- Brand: Phidgets
- Product Code: LED1000_0
- Availability: In Stock
-
59.29€
- Ex Tax: 49.00€