Description:
This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.

You can adjust the operating distance by turning a screw placed on the bottom end of the sensor.

Specifications:

Sensor Properties

Electrical Properties

Physical Properties

Resources
This sensor connects to any device with a Digital Input.

• Lanbao Datasheet
• Download 3D Step File

This is how you connect the 3524 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:

• Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3524 Brown wire.
• Connect the 3524 Black wire to a Digital Input on the 1018.
• Connect the Power supply Ground Wire and the 3524 Blue wire to the Digital Input Ground connector on the 1018.

Note:When the 3524 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).

 

 

 

 

 

 

 

 

For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget.