Description:
The PhidgetStepper Bipolar HC (1067) allows you to control the position, velocity, and acceleration of one bipolar stepper motor. The 1067 can be used in applications that require very precise positioning; This is also the product you want to use to control larger industrial steppers or for applications that need a lot of torque. This board requires an external 10 to 30VDC power supply - not included

This board is USB isolated, protecting your system from ground loops, and comes with a built-in replacable ATP Blade Terminal fuse to protect against an over-current scenario. The PhidgetStepper Bipolar HC connects directly to a computer’s USB port. It comes with a Mini-USB Cable 180cm (3018) and a Hardware mounting kit (4 nuts and bolts, 4 plastic spacers).

Specifications:
Motor Type: Bipolar Stepper
Number of Motor Ports: 1
Motor Position Resolution: 1⁄16 Step (40-Bit Signed)
Position Max: ± 1E+15 1/16 steps
Stepper Velocity Resolution: 1 1/16 steps/sec
Stepper Velocity Max: 250000 1/16 steps/sec
Stepper Acceleration Resolution 1 1/16 steps/sec²
Stepper Acceleration Min/Max: 2 1/16 steps/sec² - 1E+07 1/16 steps/sec²
Available Current per Coil Max: 4 A
Supply Voltage Min/Max: 10 V DC / 30 V DC
Current Consumption Board Min: 25 mA
Power Jack: 5.5 x 2.1mm Center Positive

Resources:
More information to be found in the User Guide


Warning: Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the PhidgetStepper board.