Description
These chrome-plated metal buttons are rugged and look real good while
doing it! Simply drill a 16mm hole into any material up to 1/2" thick
and you can fit these in place, there's even a rubber gasket to keep
water out of the enclosure. On the front of the button is a flat metal
actuator, surrounded by a blue plastic LED ring. On the back there are 3
contacts for the button (common, normally-open and normally-closed) and
2 for the blue LED ring (+ and -). Connect 3 to 6V to the LED to have
it light up nicely, there's a built in resistor! If you want to use this
with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in
series with the LED connection to keep the LED current at around 20mA.
This
button is a momentary push button, when you press it the
'normally-open' contact shorts to the common contact. When you release
it, the contacts open up again.
The switch and LED are separated,
so you could wire it to turn on when pressed or vice versa or whatever
you wish! Check the tech details for information!
Phidgets and Arduino users:
These buttons work perfectly well with most of our interfacekits. Use them as digital inputs in your projects. The LED can be turned on or off or have them be on permantly: no external power source is needed!
Technical Details
- Drill hole diameter: 16mm
- Switch rating: 3A / 250VDC
- Switch contacts: 1 NO, 1 NC
- Material: Chrome plated brass
- Contact resistance: < 50 mOhm
- Insulation resistance: > 1000 Mohm
- Temperature: -20 C to +55 C
- Mechanical life: > 500,000
- Electrical life: > 50,000
- Panel thickness: 1-13mm
- Operating pressure: 1.5 - 2.5 N
- Operating stroke: 2mm
- Lamp rated voltage: 6V
Rugged Metal Pushbutton with Blue LED Ring - 16mm Blue Momentary
- Brand: Adafruit
- Product Code: 18300
- Availability: In Stock
-
6.50€
- Ex Tax: 5.37€
Related Products
PhidgetInterfacekit 8/8/8 - 1018_2B
Description: One of the most popular Phidget Interfaceboards we have in store. This board (1018_2B..
103.52€ Ex Tax: 85.55€
PhidgetInterfaceKit 2/2/2 USB ( 1011 )
Product Description: Designed for customers who only need a couple of Analog Inputs, Digital Input..
64.67€ Ex Tax: 53.45€
PhidgetInterfaceKit 8/8/8 w/6 Port Hub - USB
Description:This board is equal to the 1018_2B with an on-board powered 6-port full-speed (12Mbit/s)..
144.75€ Ex Tax: 119.63€
VINT Hub Phidgets (HUB0001_0)
VINTHUB Description: If you place an order with Phidgets, it's very likely you'll want a VINT Hub P..
47.13€ Ex Tax: 38.95€
4x Digital Input Phidget ( daq1200 )
Description: The DAQ1200 allows you to connect 4 digital inputs; connect switches, buttons, or any..
16.95€ Ex Tax: 14.01€
1-Port VINT Hub Phidget - HUB0007_0 - Phidgets
Description:This compact VINT Hub provides a way to connect one VINT device to your computer.The VIN..
33.20€ Ex Tax: 27.44€
VINT Hub Phidget 2 - HUB0002
Description:The VINT Hub is one of the most commonly used Phidgets. Connect up to 6 devices to your ..
51.97€ Ex Tax: 42.95€