This motor is IN STOCK, March 2024!

Description:
The 3269E is a 24 volt gear motor, generating 5.1 Kg-cm of torque at 588 RPM. It's a large motor that provides lots of torque, even at higher speeds.

This motor comes equipped with an HKT22 Digital Encoder, which keeps track of the motor's rotation, allowing you to control your motor precisely. Also the Motor comes with the Encoder cable, enclosed with the motor!

The planetary gearbox on this motor is more sophisticated than a typical spur gearbox and will provide greater efficiency, higher torque, and quieter motor operation.

Specifications:

• Motor Type: DC Motor with Encoder
• Motor Version: 3269_3
  
• Output Power (Mechanical): 30 W
• Maximum Speed at Rated Voltage: 588 RPM
• Rated Torque: 5.1 kg·cm
• Stall Torque: 31.2 kg·cm
• Rated Voltage: 24 V DC
• Rated Current: 2.2 A
• Stall Current: 10.8 A
• Shaft Diameter: 12 mm
• Wire Length: 300 mm
• Weight: 1.3 kg
• Gearbox Type: Planetary
• Gear Ratio: 4 1⁄4 : 1
• Number of Gear Trains: 1
• Maximum Strength of Gears: 46 kg·cm
• Shaft Maximum Axial Load: 200 N
• Shaft Maximum Radial Load: 100 N
• Backlash Error: 3°
• Encoder Resolution: 360 CPR
• Connector Type: E4P
• Current Consumption Min: 27 mA
• Supply Voltage Min/Max: 4.5 V DC / 5.5 V DC

Resources:
DC Motor and Controller Primer

NB  This is the version with assembled motor with encoder. You can also buy the 3269_3 motor and HKT22 encoder a little bit cheaper, but then you must assemble the encoder yourself. We test each 3269E system before packing. This product has changed over the times (both mechanically and also Encoder type). 3269E motors cannot be changed or refunded, since these are custom-build by us.

Information about Auto-Steering systems:

http://cerea-forum.de