Description:

Connect any PT-100 or PT-1000 temperature probe and get the values by UART or I2C. Extreme sensing range (-126.000 °C to 1254 °C) and accuracy down to the thousandths place (+/- 0.002). Made by Atlas Scientific. You need a carier board, or BNC connector or Tentacle shield to connect this board.

Specifications:

• Extreme sensing range from -126.000 °C to 1254 °C
• Accurate temperature readings down to the thousandths place (+/- 0.002)
• Automatically detects if probe is PT100 or PT1000
• Temperature output in Celsius, Kelvin or Fahrenheit
• On-board data logger storing up to 50 individual temperature readings
• Optional single point calibration
• Single reading or continuous reading modes
• Data format is ASCII

• UART asynchronous serial connectivity (RX/TX voltage swing 0-VCC)
• I2C (default I2C address 0x66)
• Compatible with any microprocessor that supports UART, or I2c protocol
• Operating voltage: 3.3V to 5V
• Reads temperature from any off-the-shelf PT100 or PT1000 temperature probe
• Sleep mode power consumption
• 0.995mA at 3.3V

• Dimensions: 13.97mm X 20.16mm (0.55″ X0.79″)
• Weight: 1.76 grams

Resources:

Manufacturers Product Page